Please follow the below maintenance program to maximize the longevity of the product while minimizing wear and tear.
Forearm Support Hardware
It is recommended that the Forearm Support Hardware is periodically examined for any loose components. To test, please do the following:
Step 1: Stabilize the forearm support with one hand.
Step 2: Confirm that the top hardware is secured tight. If loose, please secure with a wrench so it is snug. Do not overtighten.
Step 3: Confirm that the side hardware is secured tight. If loose, please secure with a wrench so it is snug. Do not overtighten.
Tension Scale Hardware
Depending on how often the SaeboMAS is used, the Tension Scale vertical screw (attached to the Tension Indication Knob) may need more lubricant. If you hear a slight “squeak” while adjusting the tension, or it is becoming increasingly difficult to adjust the tension, please apply WD-40 (or something similar) along the length of the vertical screw. Once it is applied, adjust the tension from 1 to 15 to make sure the screw is coated evenly.
• It is important to confirm that all hardware (bolts, screws) are secured (not loose) to maximize use and limit wear and tear.
• Examine the Table Mount to make sure all hardware is secure and working in proper order.
If you have any questions regarding the maintenance of your SaeboMAS, please do not hesitate to contact Saebo at 888-284-5433 or Open a Support Ticket. We would be happy to assist you.