The Lead Wires connect the control unit of the SaeboStim Micro to the electromesh glove and sleeve. If you disengage the Lead Wires from the control unit, reconnecting is very simple. The Lead Wires are connected by snaps.
To reconnect the Lead Wires to the control unit, insert the snap stud
end into the inside position of the slot and slide toward the
outside position to lock in place.
- With the battery compartment of the control unit facing you, the Red Lead Wire is placed on the right-hand side of the unit and the Black on the left side. The Black Lead Wire will need to be pushed down and slid to the left to secure in place.
- The Red Lead Wire will need to be pushed down and slid to the right to secure in place.